Assembly support · FS-LW03
Hutch LW03 — assembly help & free parts
You scanned the code in your Hutch LW03 manual. This page always carries the latest assembly video, illustrated steps and free replacement parts for this model.
📹 Assembly video — we are filming the step-by-step video with the production model. It will appear right here; the illustrated steps below cover everything in the meantime.
1. Before you start
This model ships in one carton. Check the parts list on pages 2–3 of the manual before you start.
People: 1 · Time: about 30 minutes · Tools: Phillips screwdriver, the included hex key. Every panel is laser-marked with a letter that matches the parts list — lay parts out by letter first.
2. Lower run first
Build the ground-level run frame and mesh panels flat, then square before tightening.
3. Upper hutch
Assemble the sleeping box walls and floor on top — letters on every panel match the manual.
4. Ramp and rest board
Fit the ramp with its cross-cleats and clip in the solid rest board over the wire floor.
5. Trays and roof
Slide in both deep trays, then fit the roof and check it lifts and latches.
6. Latch check
Two-step latches on every door — make sure each needs two motions to open.
Missing or damaged part? Do not return the product.
Email [email protected] with your order number and the part letter from the manual, plus a photograph. We ship a free replacement within 48 hours, for 90 days after delivery. No return needed.
Still stuck? Write to [email protected] and a person replies within one business day, Monday to Friday. Tell us your model number (FS-LW03) and which step you are on.
Care tip: wipe panels dry after heavy rain and re-tighten bolts once a season. The colour manual PDF for this model will be downloadable here.